Videos


General

   

LaboGene's moving showreel

During our final moving to Bjarkesvej 5 in Alleroed, which took place 20-22 of October, we recorded our progresses in order to create a moving showreel. Here you will be able to view the entire process while receiving some "fun facts" about our moving. 

A normal day at our old factory at Industrivej 6-8, Lynge

Here you will be taken on a walk through our old factory at Industrivej on a normal working day. From our finance-, development-, purchasing- and sale department to our production, where we produce biological safety cabinets, freeze dryers, vacuum concentration systems, centrifuges etc. 

LaboGene's new packaging

We are proud to present our new packaging, which we developed in 2016. The packaging has been optimized using better and more secure materials, thereby preventing damages. At the same time, we've redesigned everything in line with our corporate identity. So now, you will always know when you receive a pallet from LaboGene. 


ScanLaf

   

Our new class 2 safety cabinets - low noise & energy consumption

In 2016, we presented our new Class II safety cabinets - Mars and Mars Pro. 
Innovative new EC fans and optimised laminar airflow allowed us to significantly reduce the safety cabinet's energy consumption and noise level. This incremental innovation makes the Mars Class II safety cabinet range to some of the quietest and lowest energy consuming cabinets on the market!
In this video, you will be able to see the process of how we have been able to reduce the noise level for our safety cabinets with 8 db(A).

LaboGene's biological safety cabinets decontamination procedure

We have together with Klaus Vognbjerg from A&H Medical made an video of how you decontaminate our safety cabinet Mars Class 2 using H2O2. 

How does the laminar airflow work in a class 2 biological safety cabinet

In this video, we are showing you how the laminar airflow works in a biological safety cabinet, Mars Pro 1500, from LaboGene.


ScanVac

   

Can it be freeze dried? - Can a freeze dryer restore a destroyed wet book? 

Jesper Scharstein will in this video illustrate if it is possible to restore a book, which has been destroyed by water, by freeze drying it in a CoolSafe freeze dryer. 
We have soaked the book in water for a couple of hours. Afterwards, we have frozen it don to approx. -100°C and finally freeze dried it. Watch our video to see the final result. 

Combine a freeze dryer and a freezer

Jesper Scharstein from LaboGene ApS will illustrate and explain how you combine the use of a freeze dryer together with a freezer.
By combining the equipment, you get the optimal facilities for pre-freezing and freeze drying your samples efficiently. 

How to fine-tune the pressure regulation on LaboGene's freeze dryers

Jesper Scharstein will in this video show you how you fine-tune the pressure regulation on LaboGene's freeze dryers, CoolSafe. Thereby making sure that the pressure regulation is working around the given set-point of the freeze dryer.

How to assemble and operate the freeze dryer, CoolSafe

Jesper Scharstein from LaboGene ApS will illustrate and explain how you assemble and operate the freeze dryer, CoolSafe.

How to assemble and operate the vacuum concentraton system, MaxiVac Alpha

Jesper Scharstein from LaboGene ApS will illustrate and explain how you assemble and operate the vacuum concentration system, MaxiVac Alpha. 

LaboGene's CoolSafe Touch panel

We will here give you a guide of how to use the new touch panel for our freeze dryers. Our Touch models have replaced our outdated Pro Control models in 2016. With the innovative new touchscreen controller, you can regulate the temperature, pressure and time of our freeze drying process with just a few TOUCH!

Boiling temperature of water? Seen from a freeze drying perspective

Here you will be able to watch a video showing how the boiling point of water changes when the pressure is being lowered in a CoolSafe freeze dryer​ 
   

ScanCool

   

Installation and operation of the cooling bath, ChillSafe

Jesper Scharstein from LaboGene ApS will illustrate and explain how you install and operate the cooling bath, ChillSafe. 

Contact LaboGene

You are always welcome to
contact LaboGene by using the below contact form
Name:
*
E-mail:
*
Telephone:
*
Message:
*
Copyright 2018 LaboGene™. All rights reserved | LaboGene ApS | Bjarkesvej 5 | DK-3450 Allerød | Tel. +45 3940 2566